ETR0328_004 GENERAL DESCRIPTION The XC6221 series are precise, low noise, high speed, low dropout regulators. They are fabricated using Torex's CMOS process. Performance features of the series include high ripple rejection and low dropout voltage, and the series include a reference voltage source, an error amplifier, a current limiter, and a phase compensation circuit. The CE function enables the circuit to be in stand-by mode by inputing L level signal. In the stand-by mode, the series enables the electric charge at the output capacitor (CL) to be discharged via the internal auto-discharge resistance, and as a result the VOUT pin quickly returns to the VSS level. The series' output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. Output voltage is selectable in 50mV increments within a range of 0.8V~4.0V, using laser trimming technologies. The current limiter's foldback circuit also operates as a short circuit protection for the output current limiter and the output pin. The series achieves a great response with only 25 A of low power consumption. Also the series has low dropout voltage characteristics, which is 80mA at IOUT=100mA and VOUT(T)=3.0V. With the use of ultra small package, USP-4 package, a small footprint circuit can be designed. Cellular phones APPLICATIONS FEATURES Output Current Dropout Voltage Operating Voltage Range Output Voltage Setting Range Accuracy : 200mA : 80mV@ IOUT=100mA, VOUT(T)=3.0V : 1.6V ~ 6.0V : 0.8V~4.0V (50mV increments) : +2% (VOUT >1.5V) (+1% Possible) +30mV (VOUT 1.45V) (+20mV Possible) : 25 A (TYP.) : Less than 0.1 A : 70dB @ 1kHz : -40 ~85 : 1.0 F ceramic capacitor compatible Cordless phones Wireless communication equipment Portable games Cameras, VCRs Portable AV equipment PDAs Low Power Consumption Stand-by Current High Ripple Rejection Operating Temperature Range Low ESR Capacitor CMOS CL High-Speed Auto-Discharge (XC6221B) Low Output Noise Ultra Small Packages : USP-4, SOT-25, SSOT-24 TYPICAL APPLICATION CIRCUIT TYPICAL PERFORMANCE CHARACTERISTICS Load Transient Response XC6221x182 VIN=CE=2.8V, Tr=Tf=5us Topr=25, CIN=CL=1uF (ceramic) Output Voltage 1.8 Output Voltage: V OUT (V) 1.7 1.6 Output Current 1.5 1.4 1.3 Time (500us/div) 100 50 0 250 200 Output Current: OUT (mA) I 1.9 300 150 1/23 XC6221 Series PIN CONFIGURATION USP-4 (BOTTOM VIEW) SOT-25 (TOP VIEW) SSOT-24 (TOP VIEW) *The heat dissipation pad of the USP-4 package is recommended to solder as the recommended mount pattern and metal mask pattern for mounting strength. The mount pattern should be electrically opened or connected to the VSS (#2) pin. PIN ASSIGNMENT PIN NUMBER USP-4 4 1 2 3 SOT-25 1 5 2 3 4 SSOT-24 4 3 2 1 PIN NAME VIN VOUT VSS CE NC FUNCTIONS Power Input Output Ground ON/OFF Control No Connection 2/23 XC6221 Series PRODUCT CLASSIFICATION Ordering Information XC6221 DESIGNATOR DESCRIPTION Type of Regulator Output Voltage SYMBOL A B 08 ~ 40 DESCRIPTION : CE High Active, no CL discharge resistor : CE High Active, with CL discharge resistor : ex.) VOUT(T) = 3.0V = 3, =0 : 100mV increments, When 0.8V VOUT(T) 1.40V: VOUT(T)+30mV ex.) 0.8V =0, =8, =2 : 100mV increments, When VOUT(T)>1.5V: +2% ex.) 1.5V =1, =5, =2 : 50mV increments, When 0.85V VOUT(T) 1.45V: VOUT(T)+30mV ex.) 0.85V =0, =8, =A : 50mV increments, When VOUT(T)>1.55V: +2% ex.) 1.55V =1, =5, =A : 100mV increments, When 0.8V VOUT(T) 1.90V: VOUT(T)+20mV ex.) 0.8V =0, =8, =1 : 100mV increments, When VOUT(T)>2.0V: +1% ex.) 2.0V =2, =0, =1 : 50mV increments, When 0.85V VOUT(T) 1.95V: VOUT(T)+20mV ex.) 0.85V =0, =8, =B : 50mV increments, When VOUT(T)>2.0V: +1% ex.) 2.05V =2, =0, =B : USP-4 : SOT-25 : SSOT-24 : Embossed tape, standard feed : Embossed tape, reverse feed 2 A Output Accuracy 1 B G Packages M N Device Orientation R L 3/23 XC6221 Series BLOCK DIAGRAMS XC6221A Series XC6221B Series *Diodes inside the circuit are an ESD protection diode and a parasitic diode. ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage Output Current Output Voltage CE Input Voltage Power Dissipation USP-4 SOT-25 SSOT-24 Operating Temperature Range Storage Temperature Range SYMBOL VIN IOUT VOUT VCE Pd Topr Tstg RATINGS VSS -0.3 ~ +6.5 400(*1) VSS - 0.3 ~ VIN + 0.3 VSS - 0.3 ~ +6.5 120 250 150 - 40 ~ + 85 - 55 ~ +125 Ta=25 UNITS V mA V V mW *1: IOUT=Less than Pd / (VIN-VOUT) 4/23 XC6221 Series ELECTRICAL CHARACTERISTICS XC6221A/B series PARAMETER Output Voltage (Standard) SYMBOL VOUT(E) (* 2) Ta=25 CONDITIONS VOUT(T)>1.5V, VCE=VIN, IOUT=10mA VOUT<1.45V, VCE=VIN, IOUT=10mA VOUT(E) (* 2) MIN. x 0.98 (*3) TYP. VOUT(T) (*4) MAX. x 1.02 (*3) UNITS CIRCUIT V 1 -0.03 (*3) +0.03 (*3) Output Voltage (High Accuracy) Output Current Load Regulation Dropout Voltage (*5) Supply Current Standby Current VOUT(T)>2.0V, VCE=VIN, IOUT=10mA VOUT(T)<1.95V, VCE=VIN, IOUT=10mA x 0.99 (*3) x 1.01 VOUT(T) (*4) (*3) -0.02 (*3) +0.02 (*3) V 1 IOUTMAX VOUT Vdif ISS ISTBY VCE=VIN, VIN=VOUT(T)+1.0V, 0.8V200 - 250 10 E-2 40 mA mV mV 1 1 1 2 2 - 25 0.01 50 0.10 A A Line Regulation Input Voltage Output Voltage Temperature Characteristics Ripple Rejection Rate VOUT(T)+0.5VVIN6.0V VOUT VOUT(T)1.1V, VCE=VIN, IOUT=10mA VIN VOUT 1.6VVIN6.0V VOUT(T)1.05V, VCE=VIN, IOUT=10mA VIN VCE=VIN, VOUT Ta VOUT IOUT=30mA, -40 1.6 - 0.01 100 0.20 6.0 - %/V V ppm/ 1 1 1 - 70 - dB 3 Limit Current Short Current CE High Level Voltage CE Low Level Voltage CE High Level Current CE Low Level Current CL Auto-Discharge Resistance (* 8) 200 1.2 -0.1 - 250 30 -0.1 780 6.0 0.3 0.1 - mA mA V V A A 1 1 4 4 4 4 1 NOTE: * 1: Unless otherwise stated regarding input voltage conditions, VIN=VOUT(T) 1.0V. * 2: VOUT(E) = Effective output voltage (Refer to the voltage chart E-0 and E-1) (I.e. the output voltage when HS mode and an amply stabilized "VOUT(T) 1.0V" is provided at the VIN pin while maintaining a certain IOUT value.) * 3: The rated value of the setting output voltage VOUT(E) is shown in voltage chart E-0 and E-1. * 4: VOUT (T) = Specified output voltage (*7) (*6) * 5: Vdif={VIN1 -VOUT1 } * 6: VOUT1=A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT {VOUT(T)+1.0V} is input in the HS mode. * 7: VIN1=The input voltage when VOUT1 appears as input voltage is gradually decreased. * 8: For the XC6221B series only. The XC6221A series discharges by resistors R1 and R2 only as shown in the block diagrams. 5/23 XC6221 Series OUTPUT VOLTAGE CHART SYMBOL SETTING OUTPUT VOLTAGE (V) VOUT(T) 0.80 0.85 0.90 0.95 1.00 1.05 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 1.60 1.65 1.70 1.75 1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 2.25 2.30 2.35 2.40 2.45 2.50 2.55 2.60 2.65 2.70 2.75 2.80 2.85 2.90 2.95 E-0 OUTPUT VOLTAGE Standard +2% (V) VOUT(E) MIN. 0.7700 0.8200 0.8700 0.9200 0.9700 1.0200 1.0700 1.1200 1.1700 1.2200 1.2700 1.3200 1.3700 1.4200 1.4700 1.5200 1.5700 1.6200 1.6700 1.7200 1.7700 1.8200 1.8700 1.9200 1.9600 2.0090 2.0850 2.1070 2.1560 2.2050 2.2540 2.3030 2.3520 2.4010 2.4500 2.4990 2.5480 2.5970 2.6460 2.6950 2.7440 2.7930 2.8420 2.8910 E-1 OUTPUT VOLTAGE High Accuracy +1% (V) VOUT(E) MAX. 0.8300 0.8800 0.9300 0.9800 1.0300 1.0800 1.1300 1.1800 1.2300 1.2800 1.3300 1.3800 1.4300 1.4800 1.5300 1.5800 1.6300 1.6800 1.7300 1.7800 1.8300 1.8800 1.9300 1.9800 2.0400 2.0910 2.1420 2.1930 2.2440 2.2950 2.3460 2.3970 2.4480 2.4990 2.5500 2.6010 2.6520 2.7030 2.7540 2.8050 2.8560 2.9070 2.9580 3.0090 E-2 DROPOUT VOLTAGE Vdif (mV) Vdif MAX. 0.8200 0.8700 0.9200 0.9700 1.0200 1.0700 1.1200 1.1700 1.2200 1.2700 1.3200 1.3700 1.4200 1.4700 1.5200 1.5700 1.6200 1.6700 1.7200 1.770 1.8200 1.8700 1.9200 1.9700 2.0200 2.0705 2.1210 2.1715 2.2220 2.2725 2.3230 2.3735 2.4240 2.4745 2.5250 2.5755 2.6260 2.6765 2.7270 2.7775 2.8280 2.8785 2.9290 2.9795 95 170 115 195 125 210 160 250 200 160 360 290 230 410 330 650 MIN. 0.7800 0.8300 0.8800 0.9300 0.9800 1.0300 1.0800 1.1300 1.1800 1.2300 1.2800 1.3300 1.3800 1.4300 1.4800 1.5300 1.5800 1.6300 1.6800 1.7300 1.7800 1.8300 1.8800 1.9300 1.9800 2.0295 2.0790 2.1285 2.1780 2.2275 2.2770 2.3265 2.3760 2.4255 2.4750 2.5245 2.5740 2.6235 2.6730 2.7225 2.7720 2.8215 2.8710 2.9205 TYP. 500 410 MAX. 850 750 6/23 XC6221 Series OUTPUT VOLTAGE CHART (Continued) SYMBOL SETTING OUTPUT VOLTAGE (V) VOUT(T) 3.00 3.05 3.10 3.15 3.20 3.25 3.30 3.35 3.40 3.45 3.50 3.55 3.60 3.65 3.70 3.75 3.80 3.85 3.90 3.95 4.00 E-0 OUTPUT VOLTAGE Standard +2% (V) VOUT(E) MIN. 2.9400 2.8990 3.0380 3.0870 3.1360 3.1850 3.2340 3.2830 3.3320 3.3810 3.4300 3.4790 3.5280 3.5770 3.6260 3.6750 3.7240 3.7730 3.8220 3.8710 3.9200 E-1 OUTPUT VOLTAGE High Accuracy +1% (V) VOUT(E) MAX. 3.0600 3.1100 3.1620 3.2130 3.2640 3.3150 3.3660 3.4170 3.4680 3.5190 3.5700 3.6210 3.6720 3.7230 3.7740 3.8250 3.8760 3.9270 3.9780 4.0290 4.0800 E-2 DROPOUT VOLTAGE Vdif (mV) Vdif MIN. 2.9700 3.0195 3.0690 3.1185 3.1680 3.2175 3.2670 3.3165 3.3660 3.4155 3.4650 3.5145 3.5640 3.6135 3.6630 3.7125 3.7620 3.8115 3.8610 3.9105 3.9600 MAX. 3.0300 3.0805 3.1310 3.1815 3.2320 3.2825 3.3330 3.3835 3.4340 3.4845 3.5350 3.5855 3.6360 3.6855 3.7370 3.7875 3.8380 3.8885 3.9390 3.9895 4.0400 TYP. MAX. 80 140 7/23 XC6221 Series OPERATIONAL EXPLANATION
|